Slim Straight Stretch Selvedge Denim

[DENIM WORKS] Selvedge denim woven on vintage power looms

A brand built around KURASHIKI ORDER JEANS.

Our authentic made-to-order jeans, each designed from its own pattern,

are highly regarded overseas for their craftsmanship and innovative system.

A silhouette carefully selected from the "master patterns" developed through our order jeans.

*Leather patch design may change.

Selvedge Stretch Denim

It looks almost identical to our 100% cotton selvedge denim,

but a touch of stretch makes these

jeans easier to move and wear.

[What is selvedge (the finished edge of the fabric)?]

Selvedge denim is denim fabric woven on old-style looms, with a distinctive finished edge on both sides of the fabric.

It is the edge added so the fabric's woven ends do not fray.

It refers to the edge that appears mainly on the outseam of jeans made using the sides of the fabric bolt.

Watch our introduction video on YouTube!

*Prices shown in the video are as of 2021/10/06.

When jeans are made from selvedge denim, turning up the hem typically reveals the edge as shown in the image.

This white-and-red edge, known as "red selvedge," is the signature of selvedge denim.

Made in Japan

About Hemming

We offer free hemming on selected bottoms.

If you would like hemming, please check the product details page,

Please review the measuring instructions and notes below, and enter your desired inseam length in the order notes field.

(Example)

Order notes

Please hem to an inseam of XX cm.

How to Measure the Inseam

Please prepare a pair of bottoms you own. Use a pair that has been worn and washed.

*If possible, use bottoms of the same type as the ones you plan to purchase.

STEP1

On a flat surface, align the center as shown and refold them so they lie flat.

STEP2

Lift the leg of the top layer and fold it as shown.

*Please do not pull too hard.

STEP3

I: Using a tape measure, measure from the crotch seam along the inseam down to the hem.

II: Start from the crotch seam on the side closer to the hem, aligning it with 0 cm.

III: Measure along the seam to the hem.

*When measuring, always follow the seam carefully.

*Hold the starting point firmly in place so it does not shift while measuring.

*Rulers tend to cause errors, so please always use a tape measure.

Tip

For customers requesting hemming on jeans with used or distressed finishes

For jeans with used or distressed finishing at the hem, as shown in the photo (before hemming),

If you only need about 2 cm shortened, we recommend leaving them uncut so you can keep enjoying the finish.

▼Hemming notes

Hemmed items cannot be returned or exchanged.

Please check the length, size, and product carefully before ordering.

Please allow a tolerance of ±0.5 cm from your requested finished length.

Depending on the length cut, stitch marks from the original hem may remain.

Any finishing on the original hem will be lost when hemmed.

If you plan to wear the item rolled up, please allow extra length for the roll-up when specifying your hem length.

If you have any questions, please feel free to reach out via our contact form.